Sep 19, 2011

Lisp : Coordinates with Table

   Coordinates with Table Lisp help you while creating setting out drawing , It will create a coordinate table according to the coordinate points placed in the drawing.



Steps :
  • Load Coordinates Lisp
  • Type Command “CN” to place Increment Coordinate Points


  • If need to create some sub points, Type “CSN” to place Increment Coordinate sub Points. This also allows to create sub points after placing all increment coordinate points.


  •  After placing points type command “CRT” to create Table


  •  Type “A” to select all Points
  • Then Pick a point on your Layout to place table. This will automatically create a table with all coordinates placed under the model space. The coordinates table will automatically create the table with an ascending order.



Specification:
  • It will create new test style “Gen-text
  • It will create an attribute block “CRBLK
  • It will Place Points in new layer “Coordinate Points
  • It will place Table in new layer “Coordinate Table
  • It will automatically change “UCS to World” and back to “previous

Steps to Edit Coordinate Points
  • If the alignment of drawing changed and need to edit some points coordinate value,
  • Move the points according to the setting out,
  • Type command “CRT” to create new edited coordinate table


  • Type “S” to select modified  Points
  • Then Pick a point on your Layout to place new table. This newly table will create only those coordinate values of the changed points.


  • And replace the newly coordinates table values with the existing values.
Note:
  • This Lisp is crated to place coordinate points up to “99” only,  If you have points more than 100, pursue following steps.
  • Coordinate Table lisp will count all “CRBLK” block and extract data of each Block to create Table.
  • Place points up to “99” the run command “CRT” to place table.
  • After that type command “RENAME”  and rename block “CRBLK” to “CRBLK-1”.
  • Then continue placing points from “100”  and run command “CRT” to create new table starting form 100.

Errors:
  • While using  “sub points” order of points may not be in the ascending order, so adjust manually to make it in an ascending order. 



Related Post : Easting & Northing

64 comments:

  1. Hi Bijoy Manoharan. I can't download the file. It said " you need permission to access this item" . How should I do? Do I have to register some membership of the download site or does it require any password?. Please answer @ teerapat.inarm14@gmail.com . Thanks a lot.

    ReplyDelete
  2. why not have an actual table instead of lines and text

    ReplyDelete
  3. Many thanks, the lisp file worked a treat :-)

    ReplyDelete
  4. Hi did any body have coordinates lisp which is making the coordinates table in the auto cad

    ReplyDelete
    Replies
    1. ya i have it please send your email ..

      Delete
    2. Could you send it to sandyrocky149@gmail.com

      Delete
  5. hai bijoy , first thanks for ur lisp.i used this program.It is very useful. I need little help from u. i dont need the fraction values for coordinates.Is it possible

    ReplyDelete
  6. hai bijoy
    i need leader from point to text location, is it possible

    ReplyDelete
  7. HI BROTHER Thanks for This Lisp. Can you Please add Level with Coordinate so We can Proceed Complete Table.if possible Please update and Notify me on My Mail- imranautocad@yahoo.com
    Thanks & Regards

    ReplyDelete
    Replies
    1. Coordinate with Levels
      http://www.cadlispandtips.com/2017/12/lisp-settingout-table.html?showComment=1514467579012#c9118127963513456128

      Delete
    2. Hello sir cathis lisp only make table of 99 points can u make table of all points more than 99

      Delete
  8. Dear sir
    if you have any Lisp for Coordinate we Direct put in Excel if you have Please Update

    ReplyDelete
    Replies
    1. http://www.cadlispandtips.com/2014/09/tip-extract-attribute-data-to-excel-or.html

      Delete
  9. its nice ,but need ur help to edit the table and text size ....
    pls

    ReplyDelete
  10. Many thanks, the lisp file worked a treat :-)

    ReplyDelete
  11. veryyyyyyyyyy thnnnnnnnnnsssss JOICE CAD i feel very happy with this lisp its amazing brother thnx again

    can it could be possible the arrow is not coming i want points with arrow please give me solution on email
    janghu4@yahoo.com

    AJIT SINGH
    FROM INDIA

    ReplyDelete
  12. Its very Nice but there is one problem .. after decimal the figure not comes accurate so can u tell me any solution

    ReplyDelete
  13. hi please cont me my computer not working
    roshan.cyriac@gmail.com

    ReplyDelete
  14. Bijoy iam searching for the table who automatically getting the rectangular coordinate (Coordinate number A,B,C,D).please help me.My ID is.vipinmachingal@gmai
    l.comThank you.

    ReplyDelete
  15. Bijoy,

    Thank you for the LISP, It was very helpful. Quick question; I was wondering how I could edit the LISP in order to change the precision of the coordinates in the table, as I would like to display the eastings and northings without three decimal places (i.e. 00000000 instead of 00000000.000).

    Any advice would be greatly appreciated,
    Thanks again,
    Kind regards,
    Scott (email: scott.lang@axismason.com)

    ReplyDelete
  16. hi bijoy
    I CAN USE THIS AUTO CAD 2014. I TRY BUT NOT WORKING

    ReplyDelete
  17. For me it works in 2015 perfectly. I would be nice that code has ability to place the blocks at polyline veritices automatically.Thank you!

    ReplyDelete
  18. Replies
    1. Coordinate with Levels
      http://www.cadlispandtips.com/2017/12/lisp-settingout-table.html?showComment=1514467579012#c9118127963513456128

      Delete
    2. GoodAfter noon my friend, i can’t download the lisp.. can you help me please
      My email is
      Eng.mina131@gmail.com
      Thanks dear .

      Delete
  19. This comment has been removed by the author.

    ReplyDelete
  20. its amazing ...thanks
    pls tell me how increase the text sizes in the point annotation please mail me ratrangana88@hotmail.com

    ReplyDelete
    Replies
    1. Hi, doesn`t work for Autocad MAC 2015?. Lisp file is only for windows?

      Delete
  21. Dear bejoy,
    Bijoy i am looking for multi line fillet Lisp.you have any Lisp ? Amazing work.

    Thanks,
    BM

    ReplyDelete
  22. is a very good effort, i love i so much. please i will love it to include bearing, distance and area

    ReplyDelete
  23. I'm trying to find border/titleblock around a survey drawing with the corresponding x-y (Easting/Northing)coordinates displayed across the top and down the left-hand side of the border (looks a bit like some of the standard template title blocks).


    Anyone know this routine and where I can find it?




    Thanks in advance

    ReplyDelete
  24. Hi,

    Is there anything like that but considering the levels of the points rather than coordinates?

    Regards
    Leandro

    ReplyDelete
  25. This comment has been removed by the author.

    ReplyDelete
  26. Hi,

    would it be possible to add elevation to the co-ordinates table to produce xyz setting out ?

    ReplyDelete
  27. Hi,
    unfortunately it doesn't work and it shows up the following error: "error CLAYER VALUE"

    ReplyDelete
  28. Awesome lsp

    I'm very very thankful for you :)

    ReplyDelete
  29. Hi there, I was trying to edit your lisp in order to get points coordinates according to a current UCS rather than the world UCS, but I did not succede. I'm sure it is a very stupid mistake in my code. Would you be so kind to explain how to achieve it?

    ReplyDelete
  30. its really fantastic , thanks for your sharing this file

    ReplyDelete
  31. It works really good.Thank you soo much..

    ReplyDelete
  32. I need your help, is there anyway to reduce the amount of decimals that the program shows??

    ReplyDelete
  33. Hi,

    Thanks for the lisp program, very useful for me. Can you tell me how to control precision dimension (i.e)0.000 to 0.0 or 0.00.

    It'll be helpful for me thanks in advance. If you can notify through mail also no problem for me. Mail id - nagarajan05d63@gmail.com

    ReplyDelete
  34. ITS A VERY GOOD ONE. MANY THANKS BRO..

    ReplyDelete
  35. Very good one. Thanks a lot. It saved me lot of time

    ReplyDelete
  36. Thanks a lot man. very useful and simple lisp.

    ReplyDelete
  37. Doing so will completely erase all the data and settings from your iPod and essentially give it a new chance at a less problematic life. If only certain aspects of your iPod are giving you trouble such as the applications low level format hard drive, there are several options you can choose from when you restore your iPod that can help you troubleshoot the issue.

    ReplyDelete
  38. Hi...can you please include the Z or elevation coordinates on the table...Thanks in advance

    ReplyDelete
  39. This comment has been removed by the author.

    ReplyDelete
  40. Sir send coordinate table lisp
    gmail imtiyaz.srv@gmail.com

    ReplyDelete
  41. Coordinate with table command download ni ho rahy bolta this file not sport

    ReplyDelete
  42. Pls sir send too me settingout lisp and how we disply automatic dimention in.one time for a plot

    ReplyDelete
  43. Sir this is very useful for me. i also need is for hole(now i select a point but i want to select a hole) with diameter coloumn is there is any way? if you have a time pls update. thanks in advance.

    ReplyDelete
  44. Sir this is very useful for me. i also need is for hole(now i select a point but i want to select a hole) with diameter coloumn is there is any way? if you have a time pls update. thanks in advance.

    ReplyDelete
  45. Thank you for such information. Do you look for the Top Mall Architects in India? If the answer is in yes, then visit Design Forum International. We have the top experienced professional team, which ensures for the best mall architects in India. We have the best-talented architect team. We do the work undertaken with a deep sense of optimism, excellence, and integrity keeping in minds that for each project.

    ReplyDelete
  46. This comment has been removed by the author.

    ReplyDelete
  47. HI,
    brother i am trying to do some correction in lisp to extend columns but i am unable to do can u please suggest me how to do it
    my mail id:navlt2404@gmail.com

    ReplyDelete
  48. Very usful, Thank you!

    ReplyDelete
  49. hi pls provide hole chart lisp for autocad 2015

    ReplyDelete