Jun 12, 2012

Lisp : Set Datum

    A datum is a reference point or axis on an object against which measurements are made. Horizontal datum’s are used for describing a point in easting and northing coordinates and vertical datum in station and elevation.

    The Set Datum Lisp helps to set datum points in your drawing. Suppose you have a layout plan which  is not to coordinate and you know at least one coordinate point of that drawing ,you can set that coordinate to the same point or if you have a profile you can set datum point of station and elevation.(ie a point of a known x-axis and y-axis).



Steps:-
  • Download SET DATUM.lsp Click here...
  • Load SET DATUM lisp file
  • Set datum origin, Command “ DAT
                     a. Enter Eastward Coordinate or Station datum
                     b. Enter Northward Coordinate or Elevation datum
                     c. Pick datum origin point.
  • Set datum origin back to UCS world, Command “ UW
 Notes:
  1. Rotated Objects will not give accurate coordinate, If you are  changing datum point please check atleast two coordinate.
  2. If you are changing datum coordinate, reset UCS to world before you close. 

Similer Microstation Key-in is “GO=000,000”


11 comments:

  1. how to create cross section with lisp
    please Replay me On My Main sanju2323@yahoo.co.in

    ReplyDelete
  2. how to create cross section with lisp
    please Replay me to my address sanoigeea@gmail.com

    ReplyDelete
  3. How set Rotated Objects datum coordinate, i have two point coordinate, how to set this coordinate in normal drawing, i dont want to rotated my drawing evey time to gice coordinate for site people, please help me out this two point set coordinate.
    If you are changing datum coordinate, reset UCS to world before you close.

    ReplyDelete
  4. Can you help me, How to make Road cross section using Lips File.
    Email:- jeethu.vijay@gmail.com

    ReplyDelete
  5. how to create cross section with lisp

    ReplyDelete
  6. how to create cross section with lisp
    my Emaile tahirhq@yahoo.com

    ReplyDelete
  7. sir this is my gmail id sasikanth82@gmail.com i just want to generate crosssection and lsection for a plan can you please help me

    ReplyDelete
  8. Dear Sir
    Please help me how can i draw a l section for a plan
    please replay me no my mail id makwana06ce102@yahoo.co.in
    thank you

    ReplyDelete
  9. all download link in your website not working

    ReplyDelete